Jones Women’s Stratos Snowboard
Jones women’s Stratos är verkligen en bräda som passar i all träng. Från djupsnön till den hårda pisten. Med sin direktionella shape och skålade nos så går den som en dröm i lössnön, samtidigt som den med sin direktionella rocker + traction tech 3.0 (vågiga stålkanter) och korta svängradie blir en snabbsvängd raket i pisten.
Denna bräda är ett utmärkt val till dig som vill kunna åka över hela berget men samtidigt inte behöva åka ner till bilen för att byta bräda när pudersnön övergår till puckelpist.
The modern all-mountain ripper
Ideal for all-conditions freeriding, freestyle and carving
The Women’s Stratos is a hybrid all-mountain board that’s built for creative freeriding and all-terrain trickery. A tapered directional freeride shape matched with a freestyle board feel make the Stratos incredibly playful and agile in pow and mixed conditions. The Stratos wants to slice turns and bounce down the mountain popping off every bump, jump or cliff.
Key Benefits
- Mid-stiff flex for power and control
- Tapered directional shape for nimble float
- Directional rocker profile for float + grip
- Short sidecut for tight slashing
- Flax / Basalt Stringers and Eco-Plastic Topsheet to absorb chatter in rough snow
- 3D Contour Base for ultra fast glide and fluid turn intiation
Shape Tech
1. Traction Tech 3.0
Traction Tech 3.0 features three bumps per edge (front binding, board center, back binding). The middle bump is slightly bigger than the outside bumps for better grip.
2. Progressive sidecut
At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.
Tapered shape, 10 mm
The tapered shape sinks the tail in pow for better float and quicker turns.
Blunt nose
How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. – Jeremy Jones
Directional Flex Pattern
Off set tip-to-tail flex pattern that is designed for directional freeride boards. The nose, center of board and tail are slightly different stiffnesses to help lift the nose, sink the tail and improve stability at speed.
V-Core
Jones exclusive wood core profiling that offers a stable and playful board feel. The wood core is softer between the feet for easy turn initiation and stiffer in the nose and tail for stability riding through uneven terrain and landing airs.
3D Contour Base
3D Contour Base 3.0
Freeride focused 3D-base contours featuring an even balance of 7mm of spoon bevel in the nose and 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.
Directional Rocker
A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.
“My experience is that most falls in freeriding start from the nose of the board – you either go over the bars in powder, the nose gets caught under a weird crust and tosses you, or you hit a hard tranny at the contact point of the tip and get bucked. Directional Rocker eliminates most of these falls.” – Jeremy Jones
Built with the finest tech and materials
100% of our adult models feature high-end materials, construction technologies and sustainable manufacturing process. We accept no compromises in producing the most durable and sustainable snowboarding gear.
Base
Sintered 9900 Base
Made from Ultra-High Molecular Weight Polyethylene (UHMW-PE) and Carbon. This ultra-fast base is easy to repair thanks to the UHMW-PE.
Wend Natural Wax
Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.
Fiber
Biax fiberglass
A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.
Insert pack
Float Pack
Allows super setback stance for deep pow days.
Other features
Bio Resin
Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organic raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes. Bio-resin requires 33% less greenhouse gas emissions to produce than conventional epoxy.
Oversized recycled edges
All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.
Recycled ABS Sidewalls
ABS Plastic is one of the necessary evils of snowboard production. We improve the sustainability of our snowboards by using only recycled plastic.
Factory Tuned
All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.
Forever Flex
Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.
Reinforcements
Basalt Power stringers
Sustainable strength. Basalt stringers are made with 100% natural fibers and help transfer power to the edges, improve torsional response and absorb board chatter.
Topsheet
Textured Eco-plastic topsheet
Bio-plastic topsheet made from Castor beans featuring a subtle texture for added durability. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).
Woodcore
Ultra Core
Dual-density premium wood core made of mostly paulownia with specially positioned poplar stringers for better durability and turn power.
Board Specs
Snowboard Info:
Board Size (cm) | 143 | 146 | 149 | 152 | 155 |
---|---|---|---|---|---|
Board Weight | 2,2kg | 2,2kg | 2,3kg | 2,4kg | 2,5kg |
Surface Area (dm2) | 35,11 | 36,29 | 37,49 | 38,59 | 39,82 |
Contact Length (cm) | 98,4 | 100,8 | 103,2 | 105,8 | 108,2 |
Effective Edge Length (cm) | 105,4 | 107,8 | 110,2 | 112,8 | 115,2 |
Tip Length (cm) | 25,8 | 26,1 | 26,4 | 26,6 | 26,9 |
Tail Length (cm) | 18,8 | 19,1 | 19,4 | 19,6 | 19,9 |
Waist Width (cm) | 23,6 | 23,9 | 24,2 | 24,4 | 24,7 |
Underfoot Width – Front Foot (cm) | 24,92 | 25,18 | 25,53 | 25,69 | 25,96 |
Underfoot Width – Rear Foot (cm) | 24,82 | 25,08 | 25,42 | 25,59 | 25,85 |
Tip Width (cm) | 28,3 | 28,6 | 29 | 29,3 | 29,7 |
Tail Width (cm) | 27,3 | 27,6 | 28 | 28,3 | 28,7 |
Sidecut Radius (m) | 6,1 | 6,3 | 6,5 | 6,7 | 6,9 |
Taper (cm) | 1 | 1 | 1 | 1 | 1 |
Reference Stance (cm/in) | 53 / 20,8 | 53 / 20,8 | 55 / 21,6 | 55 / 21,6 | 55 / 21,6 |
Centered Stance (cm/in) | 51 / 20 | 51 / 20 | 53 / 20,8 | 53 / 20,8 | 53 / 20,8 |
Insert Pack | Float Pack | Float Pack | Float Pack | Float Pack | Float Pack |
Stance Setback (cm) | 2 | 2 | 2 | 2 | 2 |