UNION – Charger FC | Black
Charger FC
If steep and deep is your goal, the Charger FC will get you there. Built using Union’s most advanced materials and latest manufacturing techniques, the Charger FC is the go-to choice for professional splitboarders like Kevin Jones.
Binding Includes: Mounting hardware, Charger split disk w/ magnesium adapter plates, Charger quiver disk w/ magnesium adapter plates, touring brackets, and splitboard strap.
Charger Split Disk</h4
With zero room for a pin a in the center of the disk, the Charger split disk connection is now stronger than ever. A small notch in the rear split disk allows for the Chargers easy to use lever to lock you into place.
Step 1
Pull the lever up in the rear baseplate and position the baseplate over the disk at a 90* angle, the lever should align with with the two reference points on the disk. Push the baseplate down onto the disk.
Step 2
Turn the baseplate counterclockwise until it stops.The bindings rotatoin will help to pull the two halves of the splitboard together allowing for the best possible splitboard connection.
Step 3
Push the lever down to lock the binding into place. You’re now ready to strap in and enjoy the ride down.
Charger Touring Bracket
No pins needed. The Charger Touring Bracket is the future of Union Binding splitboard technology. Simple, easy to use, and incredibly light weight.
Step 1
Turn the baseplate vertical and align it with the bracket tips.
Step 2
Slide the baseplate inwards until you feel it stop. Be sure to push the baseplate fully into place before pushing down. The baseplate will only release at a full 90* angle.
Step 3
You’re now ready to tour. For help on steep climbs, flip down the heel riser underneath the baseplate and lock securely into place.
Här kan ni se en video på hur man monterar bindningar från Union.