Jones Solution Splitboard

1. Inside & outside Traction Tech 2.0

Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board. Inner edge Traction Tech Inner edge Traction Tech improves splitboard edge grip on ascent. Three sidecut bumps on each side of your binding keep your locked in on icy skin tracks no matter which way you are traversing.

2.Progressive sidecut

At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

3. Quick Tension Tail Clip

Built-in climbing skin tension system using pre-cut notch that eliminates the need for a traditional skin tail clip.

4. Boltless Bridge

The Boltless Bridge eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker, providing better torsional stiffness and a more powerful connection at the split clips.

Tapered shape, 12.5 mm

The tapered shape sinks the tail in pow for better float and quicker turns.

Blunt nose

How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. – Jeremy Jones

Directional Rocker

A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

“My experience is that most falls in freeriding start from the nose of the board – you either go over the bars in powder, the nose gets caught under a weird crust and tosses you, or you hit a hard tranny at the contact point of the tip and get bucked. Directional Rocker eliminates most of these falls.” – Jeremy Jones

Base

Wend Natural Wax

Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Flip-Flop Base

Producing two or more base color options minimizes p-tex waste. Order may be filled with either color. Color does not vary by size.

Sintered 9900 Base

Made from Ultra-High Molecular Weight Polyethylene (UHMW-PE) and Carbon. This ultra-fast base is easy to repair thanks to the UHMW-PE.

Extra hardware

Karakoram Ultra Clips 2.0 with Tip-Lock

Redesigned Karakoram Ultra Clips 2.0 are lighter weight, clamp tighter and have a smaller footprint than the original Ultra Clip. They are also adjustable so you can maintain even compression as your splitboard ages.

Fiber

Triax fiberglass

Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any terrain or snow conditions.

Other features

Factory Tuned

All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Inner thin recycled edges

Advancement in ski edge durability allow us to use thinner edges on splitboard inside edges to save weight. Outside edges are 2mm, inside edges are 1.5mm.

Outer oversized recycled edges

Advancement in ski edge durability allow us to use thinner edges on splitboard inside edges to save weight. Outside edges are 2mm, inside edges are 1.5mm.

Stainless steel reinforcement

Stainless steel plates are embedded into the nose and tail for improved board tip durability.

Recycled rounded ABS

Rounded sidewall finish that improves board durability by protecting topsheet from chipping.

Forever Flex

Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.

Bio Resin

Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organic raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes. Bio-resin requires 33% less greenhouse gas emissions to produce than conventional epoxy.

Reinforcements

Sustainable Flax/Basalt Power stringers

Sustainable stringer made with 100% natural fibers. Basalt stringers improve torsional response and transfer power from under your feet to the tips of the board to eliminate nose and tail chatter.

Topsheet

Textured Eco-plastic topsheet

Bio-plastic topsheet made from Castor beans featuring a subtle texture for added durability. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

Woodcore

Ultra Split Core

Dual density premium wood core made of mostly paulownia with specially positioned poplar stringers for better durability and turn power.

Know your board

The dimensions of a snowboard define how that board performs on snow. The dimension specs of all our models are fine tuned for specific styles of riding. Understand how waist width, flex and sidecut and stance dimensions effect board performance to find the best board for you.

Board Size (cm)	154	158	159	161	162	164	165	167	169
Board Weight	2,8kg	2,9kg	3,1kg	3kg	3,2kg	3,1kg	3,3kg	3,3kg	3,5kg
Surface Area (dm2)	39,53	40,97	43,33	42,13	44,12	43,30	45,50	44,97	47,39
Contact Length (cm)	103,2	106,6	107	109	110	111,6	112,4	113,6	115,6
Effective Edge Length (cm)	114,2	117,6	118,0	120,0	121,0	122,6	123,4	124,6	126,6
Tip Length (cm)	32,4	32,7	33,0	33,0	33,0	33,2	33,3	33,7	33,7
Tail Length (cm)	18,4	18,7	19,0	19,0	19,0	19,2	19,3	19,7	19,7
Waist Width (cm)	24,60	24,90	26,30	25,20	26,30	25,40	26,60	25,90	27,00
Underfoot Width – Front Foot (cm)	26,09	26,46	27,83	26,68	27,75	26,85	28,04	27,34	28,50
Underfoot Width – Rear Foot (cm)	25,55	25,91	27,30	26,17	27,25	26,35	27,54	26,84	27,99
Tip Width (cm)	29,2	29,4	30,7	29,6	30,7	29,9	31,1	30,5	31,7
Tail Width (cm)	27,8	28,1	29,5	28,3	29,4	28,6	29,8	29,2	30,4
Sidecut (m)	7,9	8,5	8,7	9,1	9,3	9,3	9,4	9,4	9,5
Taper (cm)	1,36	1,30	1,27	1,23	1,22	1,23	1,23	1,25	1,25
Reference Stance (cm/in)	–	–	–	–	–	–	–	–	–
Centered Stance (cm/in)	54	58	58	58	58	58	58	58	60
Insert Pack	Splitboard Pack	Splitboard Pack	Splitboard Pack	Splitboard Pack	Splitboard Pack	Splitboard Pack	Splitboard Pack	Splitboard Pack	Splitboard Pack
Stance Setback (cm)	2,0	2,0	2,0	2,0	2,0	2,0	2,0	2,0	2,0